Get now, pay later!
The Kanger T3D is an upgrade to the popular Kanger T3S clearomizer. The T3D is a bottom dual coil clearomizer rather than a single coil clearomizer like the T3S. Dual coil clearomizers ensure a good kick of flavour and vapour from your e liquid, as heat is transferred faster and more efficiently to the coils. The T3D is also bottom fill device and is made up of four parts which are the tube, the base, the coil/head and the detachable drip tip (unlike the T3S which has a fixed mouth piece). The T3D has 510 drip tip so can be swapped with alternative 510 drip tips. The T3D has a big 2.2ml capacity and is compatible with eGo series batteries but cannot directly be used with 510 threaded devices. For use with 510 devices, please purchase 510 to eGo Adapter.
1 x Kanger T3D Bottom Dual Coil Clearomizer
1 x 1.8 ohm coil (preinstalled)
Clearomizer is rebuildable from 4 parts
Dual Coil Atomizer Head (Same heads as Aerotank, Protank 3 & EVOD Glass - See below)
Bottom Dual Coil Technology
eGo Threaded device
How To Use:
Turn T3D clearomizer upside down and unscrew the base of the unit. Hold clearomizer at 45 degrees angle and using the needle or tip of e liquid or e juice bottle, pour fluid into the clearomizer ensuring that you do not overfill the device. Do not allow liquid into the centre tubing as this will result in the e liquid or e juice coming into your mouth otherwise. Once the clearomizer is full (maximum allowed capacity of 2.2ml), screw back the base back onto the clearomizer. To avoid burning taste, ensure coils are totally submerged and soaked with e liquid or e juice. Rotate clearomizer to ensure all of atomizer is soaked in fluid and leave to sit for 2 minutes to soak to stop burning taste when used.
Please note that the central metal tubing runs from the mouthpiece to the battery. Avoid getting liquid in the central tube when filling the clearomizer. Please ensure a cloth or tissue is used at the mouth piece when refilling the clearomizer as the seals are broken when the base of the unit (holding atomizer) is unscrewed causing e liquid to leak into the mouthpiece. Common issue is the clearomizer gurgles or leaks meaning liquid has entered the metal tubing during filling. Simply remove clearomizer from battery and apply tissue at the battery end of device. Blow through the drip tip and liquid should be removed. The atomizer head of the T3D quite often detaches itself from threaded base it’s attached to. Please assure all parts are firmly attached before filling the clearomizer with e liquid or e juice. When removing the clearomizer from the battery, there will be some liquid on contact point of battery. Always remove this liquid before charging battery.
Atomizer heads are perishable items and have a life span of 10 to 20 days depending on usage. Leaking will start when atomizer head becomes worn out, therefore replacement atomizer heads will need to be purchased.
Can be used with any eGo threaded device.
|Easysmoke Tallinn Gonsiori 32||Easysmoke Tallinn Rävala pst 7||Easysmoke Mustika Karjavälja 4||Easysmoke Tallinn Sõle 61||Easysmoke Tallinn Torupilli Selver||Easysmoke Tallinn Tondi Selver||Easysmoke Tallinn Merimetsa Selver||EasySmoke Pärnu Ülejõe Selver||Easysmoke Pärnu Mai Selver||Easysmoke Pärnu Kuninga 3a||Easysmoke Tartu Poe tn 10||Easysmoke Tartu Aardla Selver||Easysmoke Viljandi Männimäe Selver|